Back
Moonlit ed.1 reptile inked rose
Moonlit ed.1 reptile inked rose
Moonlit ed.1 reptile inked rose
Moonlit ed.1 reptile inked rose
Tragevarianten MOONLIT ed.1 – Schultertasche, Crossbody Bag, Handtasche
Moonlit ed.1 reptile inked rose
Moonlit ed.1 reptile inked rose
Moonlit ed.1 reptile inked rose
Moonlit ed.1 reptile inked rose
Tragevarianten MOONLIT ed.1 – Schultertasche, Crossbody Bag, Handtasche

MOONLIT ed.1
reptile inked rose
Leather crossbody bag reptile print

EUR 155

Simple and lightweight crossbody bag made of leather with adjustable vegetable-tanned strap. The unlined MOONLIT ed.1 with a striking reptile print is particularly versatile – due to the flexible carabiner rings it can be effortlessly transformed into a clutch or belt bag. Roomy enough for essentials and more.

Interior: Unlined (unless the vegan version). Roomy enough for your everyday essentials, half-litre bottle or folding umbrella as well as an 8'' tablet.

Ways to wear: Carry yours as a crossbody bag, shoulder bag, clutch or hip bag.

Combinations: Due to the carabiner rings, MOONLIT ed.1 can easily be combined with smaller INA KENT styles such as X.MOG ed.1, X.LOMI ed.2 and X.ONI ed.2. To highlight your bag, combine it with our characteristic keychains BALL’N’CHAIN ed.1 or BALLCHAIN SLING ed.1. Attached to the carabiner rings, they make an elegant and catchy chainstrap.

Straps: Made of skin-friendly, vegetable-tanned leather and dyed edges. Detachable and adjustable in small steps. Maximum length: 110 cm. Our straps are unique, the length will therefore vary by 1-2 cm. Since leather is a living material, your strap will eventually stretch over time and use.

Hardware: Our carabiner rings – everyday heroes – are easy to open and close. Designed to make each bag ultra-versatile and convertible.

Roomy enough for an 8'' tablet.

H: 22 cm
W: 29 cm

Weight: 0,2 kg

Material: 100 % cowhide leather

This item is made of vegetable-tanned leather. The surface is made by applying a special finish onto the leather, to create an intriguing optical effect. Stamping the leather, using heat and high pressure changes the natural grain pattern and creates the characteristic pattern. Every item is unique and slight variations in colour and texture may occur.

Due to the coating, the leather is protected against moisture and is best cleaned with a damp microfiber or cotton cloth. Do not apply too much pressure during the cleaning process as the surface can be harmed. In order to enjoy your INA KENT bag for many years, we recommend applying small amounts of special leather care products before using it for the first time. Repeat this process from time to time. Please also note the following:

  • Avoid contact with water
  • Do not apply any conventional products that contain solvents, oils or alcohol as they may damage the finish.
  • Clean by a leather specialist only.
  • Avoid excessive sun exposure.
  • Avoid contact with rough surfaces.

Please read our product care instructions carefully.